CS Pipeline Pipe Welding Equipment

Features:

• The clamp can be arranged with stainless steel pads for work with stainless steel pipes.
• Toggle action puts maximum power on pipe alignment
• Available with copper back-up upon request
• Easy to use and economical option for alignment of pipe
• This clamp will be operated by manually, so that No Electricity or Fuel required
• Our Pipe Joint Internal Clamp work inside the pipe to align two pipe joints for external welding in 360 degree without any disturbance

Features:

 

• Pipe sizes 10” to 48”
• Quick line-up for continuous welding of pipe.
• Complete with hook and handle.
• Full-round stringer beads eliminate costly 'tacking" and weld defects.
• Minimum weight, maximum durability.
• Screw jack type mechanism to have adequate alignment.
• Toggle action puts maximum power on pipe.
• Heavy duty Gear box puts more power on the pipe with less operator effort.
• Copper back-up for automatic welding also available upon request.
• Also available with Purging Set-up for DSS pipe upon request.

• Delivery Time: 1 Week

SPM EQUIPMENT is the leading manufacturer of pipe joint internal clamp manual. Pipe joint internal clamp manual used in the definite yard where oil and gas pipeline is where require the line-up and centering of the oil and gas pipeline. Our pipe joint internal clamp manual is made from excellent quality raw material so this clamp has distinctive features like perfect dimension, rust-proof, sturdy construction, and high durability.

Our pipe joint internal clamp manual available in standard size 10” to 48” and we can be provided customization as per client need and specification. Pipe joint internal clamp manual operates on screw jack type mechanism.

Our pipe joint internal clamp used in an offshore and onshore pipeline project in the range of 10” to 48” diameter.

• Production Capacity: 5 PER WEEK
• Delivery Time: 1 WEEK
• Packaging Details: Wooden box for Export and loose packing for Domestic

We are offering a wide range of External Hydraulic Pipe Clamp.

Features:

• Accurately aligns with minutes
• Hinged to open wide for easy mounting, use, or removal
• Circle secured by the single master pin
• Tighten with hydraulic jack to get more strength

SPM EQUIPMENT offers a variety of Cage type Pipe Clamp with Hydraulic operated for your projects in various sizes starting with 18”.

Features:

• Large tightening force.
• Only workable for one single size pipe.
• High efficiency (no needs to do adjustment).
• Matching accuracy: unfitness of butt joint≤1.5mm.
• All hydraulic no-tack Clamps have an arched cross bar design which allows 360 degree continuous welding without clamp removal.
• Hydraulic system operated with hand pump, no electricity / fuel required.
• Accurately aligns in minutes.

All Manual External Line up Clamp is precision fitted to proper specification to ensure Proper alignment and quick clamping. All standard clamps have a flat cross bar design with a convenient lever for quick line-up of the pipe. Cage Type Pipe Clamp Manual are simple, quick and easy to use.

SPM offers to contractors a full line of cage type clamps to meet the specific pipe handling needs of each projects.

Features:

• Precision built for accurate alignment and long field life.
• Available with stainless steel contact points for DSS Pipes.
• No Tack design features arched cross bars for 360 degree welding access without removing the clamp.
• Simple, quick and easy to use.
• Cage type Clamp manual is requires for each diameter of pipe.
• Accurately aligns in minutes.
• Hinged to open wide for easy mounting, use, or removal.
• Circle secured by single master pin.
• All Manual cage type pipe clamps have a flat cross bar design for more strength.

• Production Capacity: Ex-Stock up to 20" Pipe
• Delivery Time: Ex-Stock
• Packaging Details: Loose Packing for Domestic and Wooden box for packing

Features: 

• Tighten with hydraulic Jack
• Easy to alignment and very easy to use
• Available in standard and no-tack (arched bar model)
• All hydraulic Cage type Clamp are precision fitted to the proper specifications to ensure proper alignment and quick clamping with a convenient hand lever and hydraulic jack for quick line-up of the pipes.
• High efficiency (no needs to do adjustment).
• Hydraulic system operated with hand pump, no electricity / fuel required
• Accurately aligns in minutes.

• Production Capacity: 5 set Per week
• Delivery Time: 1 week
• Packaging Details: Wooden box for export and loose packing for domestic

Hydraulic External Line Up Clamp is easy for alignment and very easy to use. All Clamps are precision fitted to the proper specification to ensure proper alignment and quick clamping with convenient hydraulic hand pump and jack for quick line up for the pipe.

The clamp pulls down tight with a hydraulic jack for effortless pipe alignment. The hydraulic closure mechanism on this cage clamp also enables rapid release after welding.

 

Features:

• Hinged to open wide for easy mounting, use, or removal.
• Circle secured by single master pin.
• Tighten with hydraulic jack to get more strength.
• Available in standard and no-tack (arched bar model).
• All hydraulic cage type pipe clamps have a flat cross bar design for more strength.
• Cage type Clamp Hydraulic is requires for each diameter of pipe separately.
• Hydraulic system operated with high pressure hand pump, no electricity / fuel required.

• Production Capacity: 10 Set Per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box for Packing and Loose for Domestic

 

Banking on years of experience SPM EQUIPMENT offers a wide range of Pipe Welding Pneumatic Clamp. Pipe Welding Pneumatic Clamp reliable a rapid, accurate alignment of two joints of pipe during the welding operation. Independently operated pneumatic heads allow the lineup of pipes with different wall thicknesses.

SPM Pipe welding pneumatic clamps assures a rapid, accurate alignment of two joints of pipe during the welding operation. Front and rear heads operate independently to lock the clamp into position. Specially designed shoes on each head exert pressure uniformly around the inside circumference of the pipe to maintain necessary alignment. Each pipe welding pneumatic clamp is easily and quickly adjusted for different pipe wall thickness.

 

In order to joint pipes on site, these must be centered. In order to weld pipes on site, these must be centered. Pipe Welding Pneumatic Clamps can be used in any terrain.

 

A "Pull type - travelled" Pipe welding pneumatic clamp is pulled to the next joint (manually). Pipe welding pneumatic clamp require compressed air at 100-145 psi (7-10 bars). Maximum safe working pressure is 175 psi (12 bars).

Pull type Travelled units for pipe sizes 6" to 20”

 

FEATURES:

·       Standard sizes 6”-20”

·       Clamps 12”-20” will cover two pipe sizes by use of conversion kits.

·       Air tank provides sufficient air pressure for lining up incoming pipe joint.

·       PWPC’s are specially developed and built to withstand pipeline spread operations.

·       According to pipe wall thickness, the PWPC is adjusted to the required setting by SPM.

·       Adequate line-up at the next joint is assured by a reserve air tank.

·       Alloy steel wheels provided with clamps for smooth travelling.

·       Independently operated Pneumatic heads allow the line-up of pipes with different wall thickness.

·       Conversion kits for various pipe sizes are available upon request.

• Production Capacity: 1 unit per 1 week
• Delivery Time: 1 Week
• Packaging Details: loos packing for domestic and wooden box packing for export

SPM Pneumatic Internal Line Up Clamp is extremely robust and built to special high standards to withstand pipeline spread operations. Clamps are adjustable for any wall thickness or size within the specified range—independently operated pneumatic jaws allow the line-up of pipes with different wall thicknesses. When correctly used pipe welding pneumatic clamp will not damage or “bell end” the pipe.

 

Features:

• Pipe Welding Pneumatic Clamp covers a range of diameters and is adjustable for wall thicknesses within the specific range.
• Pneumatic Pipe Welding Clamp is adjusted to the require setting by SPM according to the pipe wall thickness.
• Pneumatic Pipe welding Clamp requires flattens air pressure from a compressor.
• SPM Pneumatic Pipe Welding Clamp is exemplary choice for construction of oil and natural gas pipeline.
• Separately operated Pneumatic jaws allow the line of pipes with different wall thicknesses.
• Adequate line up at the next joints is assured by a reserve air tank.
• The Internal Line up Clamp Pneumatic works inside the pipe. Roller-type actuating jaws hold the pipe ends to assure an adequate alignment of two pipe joints for external welding.

Banking of years of experience we are offering wide range of Pneumatic Internal Clamp With Purging System. The SPM Equipment's pneumatic clamps with purging arrangement assured accurate alignment of two joints of pipe during the welding operation. All of our pneumatic internal clamps with purging arrangement have been extremely tested in the field. Our offered pneumatic clamp with purging arrangement used to pipe welding application for carbon steel and stainless steel pipe.

 

We are specially designed shoe on each head utilize pressure uniformly around the inside circumference of the pipe to maintain necessary alignment along with necessary purging arrangement suitable for DSS pipe joint.

 

Features:

• Sufficient space for purge gas will be available in the clamp.
• Automatic centering helps to prevent Hi-low.
• Conversion kit for various pipe sizes available up on request.
• Silicon rubber is used to make purge ring because temperature is high during welding.
• The Oxygen integral exhaust out line is provided in the system for easily analyzing.
• All clamp’s touching points provided suitably for DSS pipe to prevent corrosion.
• Same expansion & closure of shoes prevents the distortion of pipes and get more tightness with precise roundness.
• Comes with SS reach Rod.
• Excellent durability.
• Sturdy construction.
• Emergency breaking system available up on request.

• Production Capacity: 2 set per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden box for Export and loose packing for Domestic

Features:

• Comes standard with carbon steel construction.
• Optional with copper or stainless steel.
• Choice of hard or soft wheels.
• Self-positioning and simple to use.
• Comes standard with 12 Mtrs. Reach Rod
• Built for rugged use, easily maintained.
• Field proven design.
• One Clamp will work with various wall thickness

 

• Production Capacity: 10 Set Per Week
• Delivery Time: 3 to 4 Days
• Packaging Details: Loose Packing for Domestic and Wooden Box for Export

SPM Equipment is leading manufacturer and supplier of Cage Type Hydraulic Pipe Clamp. Our offered Hydraulic clamps are engineered under perfection manufacturing environment.

 

We provide our clients with specified range of hydraulic Clamps at competitive prices. Available in varies sizes and dimension. We offer fittings that confirm to international standard and norms.

Features:

• Tighten with hydraulic Jack
• Easy to alignment and very easy to use
• Available in standard and no-tack (arched bar model)
• All hydraulic Cage type Clamp are precision fitted to the proper specifications to ensure proper alignment and quick clamping with a convenient hand lever and hydraulic jack for quick line-up of the pipes.
• High efficiency (no needs to do adjustment).
• Hydraulic system operated with hand pump, no electricity / fuel required
• Accurately aligns in minutes.

This type of pipeline equipment machines is usually used in certain yard where oil and gas pipeline are. The Manual Pipe Line Up Clamp is a machine which is built and used specifically for the line-up and centering of the oil and gas -pipeline, normally used under standard diameters. The clamp and the centering of the pipes are necessary for a good welding.

Features:

• Three shoes clamping
• Built for rugged use, easily maintained.

Hydraulic Internal Line up Clamps are custom built, offering a range of solutions for accurate internal alignment. These clamps are manufactured for precision and are field proven to be tough and durable.

SPM Equipment large pipe alignment clamp hydraulic is built tough to withstand the harshest conditions. This large hydraulic alignment clamp leaves the gap unobstructed for a full stringer bead. Each clamp is machined for a specific pipe ID and comes standard with a 12 meter reach rod, hook and handle.

Features:

• Easy to install and operate
• Toggle action puts maximum power on pipe
• Each clamp machined for specific wall thickness
• Heavy duty all steel construction
• Precision manufactured
• Pipeline proven
• Each Clamp requires for each diameter of pipe
• Bearings provided in the travelling wheels to move the clamp to next joint easily.

SPM Equipment brings you high quality and reliability Pipe Alignment Clamp. Each clamp machined for specific wall thickness and pipe O.D. Our Pipe Alignment Clamps are specialized for all Pipeline Project. SPM designed Pipe Alignment Clamp for efficient operations. We have various models of Pipe Alignment Clamp to choose from.

 

Features:

• Easy for alignment and very easy to use
• All Pipe Alignment Clamp Hydraulic (Inner) are precision fitted to the proper specification to ensure alignment and quick clamping with a convenient hand lever and hydraulic jack for quick line-up of the pipe
• Each Clamp requires for each diameter of pipe
• Bearings provided in the travelling wheels to move the clamp to next joint easily.

Features:

• Air tank provides sufficient air pressure for lining up incoming pipe joint.
• Adequate line-up at the next joint is assured by a reserve air tank.
• Alloy steel wheels provided with clamps for smooth travelling.
• Independently operated Pneumatic heads allow the line-up of pipes with different wall thickness.

SPM Equipment has produced Internal Hydraulic Pipe Alignment Clamp for pipe welding. Build on the prediction that hydraulic was the future "state of the art" in pipe-welding, SPM has created a unique range of clamps in close co-operation with customers around the Globe.

Features:

• Power unit required only motorize version
• Available with copper back-up
• Easy to install and operate
•  

Features:

• Air tank provides sufficient air pressure for lining up incoming pipe joint.
• PWPC's are specially developed and built to withstand pipeline spread operations.
• According to pipe wall thickness, the PWPC is adjusted to the required setting by SPM.
• Independently operated Pneumatic heads allow the line-up of pipes with different wall thickness.

SPM EQUIPMENT’s Ratchet Type Pipe Clamp-Manual is built from the ground up with a focus on speed and adaptability. Our clamp is simple, quick and easy to use. Ratchet Type Pipe Clamp-manual is screw type and operated reversible ratchet wrench supplied with each clamp.

Featuring an ergonomic design, this pipeline welding clamp is made with the operator safety and stability of the pipe in mind. All SPM EQUIPMENT clamps are constructed from solid materials for strength and durability and are built to last and acutely align pipe for years.

Ratchet Cage Type Pipe Clamp provides the extra force needed to align large pipe diameters. The ratchet clamp is available for 14” to 60” (356 mm to 1524 mm) pipe.

Features:

·       For pipe sizes from 14” to 60”

·       Screw type clamp with reversible ratchet.

·       High clamping, even pressure for maximum alignment.

·       Quick align pipes easily and fast.

·       Crossbars options are flat (tack) or arched (no tack type).

·       Each clamp fits a specific pipe diameter.

·       Left and right thread provides fast alignment.

• Production Capacity: 10 per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box for export and loose packing for domestic

SPM EQUIPMENT External Clamp for Pipeline is mostly applicable pipe size from 6” and above. Our offered External Clamp Manual with accurate design which line up pipes with maximum perfection and provides full joint for welding pipeline construction. With high precision, easy operation, light weight and reliable quality these save lot of valuable time of the project construction. We can produce the special external pipe line up clamp according to the customer order and the pipe size available from 6” and above.

• Production Capacity: 10 Piece per week
• Delivery Time: 3 to 4 Days
• Packaging Details: Wooden Box for Export and Loose for Domestic

SPM EQUIPMENT’s hydraulic External Line up Clamp for pipe from 16” and above.  The hydraulic mechanism featured with this external line up clamp is especially useful when aligning large pipe since the alignment clamp pulls down tight with minimal effort, and once welding is complete, the hydraulic cage clamp mechanism enables rapid release of the pipeline welding clamp. All rings are made from high quality material and are specially designed for welding thick-walled pipes.

Quality Mild steel construction goes into each and every SPM Hydraulic Cage Clamp, allowing rugged use and abuse in the field for job after job, and yet, accuracy with every alignment is never in question due to its expert craftsmanship.

Simple, quick and easy to use. That’s the SPM advantage, and it’s exemplified with this hydraulic line up clamp.

 

Features:

·       Available for pipe size 16” and above

·       We are also making Pipe size and lengths not listed available up on special request.

·       Each clamp fits for particular specific diameter.

• Production Capacity: 10 Set per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box for Export and Loose for Domestic

SPM EQUIPMENT is a leading manufacturer and supplier of cage-type pipe clamp hydraulic. Our offered Hydraulic clamps are engineered under a perfect manufacturing environment. All bridges and rings are made of high-quality steel and are specially designed for welding thick-walled pipes.

We provide our clients with a specified range of hydraulic Clamps at competitive prices. Available in various sizes and dimensions. We offer fittings that confirm international standards and norms.

It is mostly applicable for 18” to 88” pipe jointing operations.

SPM EQUIPMENT offers a variety of Cage-type Pipe Clamp with Hydraulic operated for your projects in various sizes starting with 18”.

• Production Capacity: 10 Set Per Week
• Delivery Time: 1 WeeK
• Packaging Details: Wooden Box for Packing and Loose for Domestic

SPM EQUIPMENT offers high-quality Cage-type pipe clamp (Outer diameter clamp) that are specifically designed and developed to fulfill the requirements of our customers. Our Cage Type Pipe Clamp Manual is manufactured from quality raw material which we procure from reliable sources. The product is widely used as pipeline equipment for specific industries all over the globe. Our Cage Type Pipe Clamp Manual is available at an affordable market price for our customers.

• Production Capacity: 10 par Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box for export and loose packing for domestic

SPM EQUIPMENT’s Ratchet Type Pipe Clamp-Manual is built from the ground up with a focus on speed and adaptability. Our clamp is simple, quick and easy to use. Ratchet Type Pipe Clamp-manual is screw type and operated reversible ratchet wrench supplied with each clamp.

Featuring an ergonomic design, this pipeline welding clamp is made with the operator safety and stability of the pipe in mind. All SPM EQUIPMENT clamps are constructed from solid materials for strength and durability and are built to last and acutely align pipe for years.

Ratchet Cage Type Pipe Clamp provides the extra force needed to align large pipe diameters. The ratchet clamp is available for 14” And Above pipe.

Features:

·       For pipe sizes from 14” And Above.

·       Screw type clamp with reversible ratchet.

·       High clamping, even pressure for maximum alignment.

·       Quick align pipes easily and fast.

·       Crossbars options are flat (tack) or arched (no tack                 type).

·       Each clamp fits a specific pipe diameter.

·       Left and right thread provides fast alignment.

• Production Capacity: 10 par Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box for export and loose packing for domestic

SPM EQUIPMENT’S Alignment clamps are custom-built, offering a range of solutions for accurate internal alignment. These internal clamps are manufactured for precision and are field-proven to be tough and durable.

SPM EQUIPMENT is a large pipe alignment clamp hydraulic that is built tough to withstand the harshest conditions. This large hydraulic alignment clamp leaves the gap unobstructed for a full stringer bead. Each clamp is machined for a specific pipe ID and comes standard with a 12-meter reach rod, hook and handle.

• Production Capacity: 5 PIECE PER WEEK
• Delivery Time: 1 WEEK
• Packaging Details: WOODEN BOX FOR EXPORT AND LOOSE FOR DOMESTIC

Features Available for pipe sizes 3 to 64 Precision built for accurate alignment and long field life Available with stainless steel contact points for DSS Pipes No Tack design features arched cross bars for 360 degree welding access without removing the clamp Hinged to open wide for easy mounting use or removal Cage type Clamp manual is requires for each diameter of pipe Will not back off while weld is being made Mechanism is enclosed to eliminate dirt or mud

• Production Capacity: Ex- Stock
• Delivery Time: Immediately
• Packaging Details: Wooden Box Packing For Export And Loos Packing for Domestic.

SPM s Cage type Pipe Clamp Manual is precision Bored for Perfect Roundness and Pipe Sizing We supply you Cage type Clamps with various sizes that fits to your needs Our Cage type Clamps are ruggedly built of quality steel to last longer Additional sizes are available upon request All Cage type Clamps are precision fitted to the proper specification to ensure proper alignment and quick clamping with a convenient hand lever for quick line up the pipe Features Very easy to use Manual Operation Will not back off when weld is being made Available in sizes 3 to 64 All Manual No tack Cage clamp have an arched bar design which allows for 360o continuous welding without removing of clamp Precision built for accurate alignment and long field life Available with stainless steel contact points for DSS Pipes upon request

• Production Capacity: Ex Stock
• Delivery Time: Immediate
• Packaging Details: Wooden Box Packing For Export And Loos Packing For Domestic

SPM EQUIPMENT s Ratchet Type Pipe Clamp Manual is built from the ground up with a focus on speed and adaptability Our clamp is simple quick and easy to use Ratchet Type Pipe Clamp manual is screw type and operated reversible ratchet wrench supplied with each clamp Featuring an ergonomic design this pipeline welding clamp is made with the operator safety and stability of the pipe in mind All SPM EQUIPMENT clamps are constructed from solid materials for strength and durability and are built to last and acutely align pipe for years Ratchet Cage Type Pipe Clamp provides the extra force needed to align large pipe diameters The ratchet clamp is available for 14 to 60 356 mm to 1524 mm pipe Features For pipe sizes from 14 to 60 Screw type clamp with reversible ratchet High clamping even pressure for maximum alignment Quick align pipes easily and fast Crossbars options are flat tack or arched no tack type Each clamp fits a specific pipe diameter Left and right thread provides fast alignment

• Production Capacity: More Than 10 Nos Per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box Packing For Export And Loos Packing for Domestic

SPM EQUIPMENT s Ratchet Type Pipe Clamp Manual is built from the ground up with a focus on speed and adaptability Our clamp is simple quick and easy to use Ratchet Type Pipe Clamp manual is screw type and operated reversible ratchet wrench supplied with each clamp Featuring an ergonomic design this pipeline welding clamp is made with the operator safety and stability of the pipe in mind All SPM EQUIPMENT clamps are constructed from solid materials for strength and durability and are built to last and acutely align pipe for years Ratchet Cage Type Pipe Clamp provides the extra force needed to align large pipe diameters The ratchet clamp is available for 14 to 60 356 mm to 1524 mm pipe Features For pipe sizes from 14 to 60 Screw type clamp with reversible ratchet High clamping even pressure for maximum alignment Quick align pipes easily and fast Crossbars options are flat tack or arched no tack type Each clamp fits a specific pipe diameter Left and right thread provides fast alignment

• Production Capacity: 5 Nos Per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box Packing for Export And Loos Packing for Domestic

The SPM Equipment's superior quality Manual Pipe Joint Internal Clamp are manufactured using high-grade iron and steel. These clamps have unique features of rust resistance, durability, sturdy construction and accurate dimensions. Designed to meet the customized specifications provided by the clients, our range operates on screw jack type mechanism in order to have adequate alignment.

 

Features:

• Quick line-up for continuous welding of pipe.
• Complete with hook and handle.
• Full-round stringer beads eliminate costly 'tacking" and weld defects.
• Minimum weight, maximum durability.
• Screw jack type mechanism to have adequate alignment.
• Toggle action puts maximum power on pipe.
• Heavy duty Gear box puts more power on the pipe with less operator effort.

• Production Capacity: 10 nos per week.
• Delivery Time: Maximum 4 day.
• Packaging Details: loos packing for domestic and wooden box packing for export.

SPM’s Manual Cage type Pipe Clamp is precision Bored for Perfect Roundness and Pipe Sizing. We supply you Cage type Clamps with various sizes that fits to your needs. Our Cage type Clamps are ruggedly built of quality steel to last longer. Additional sizes are available upon request. All Cage type Clamps are precision fitted to the proper specification to ensure proper alignment and quick clamping with a convenient hand lever for quick line-up the pipe.

Features:

• Very easy to use.
• Manual Operation.
• Will not back off when weld is being made.
• All Manual No tack Cage clamp have an arched bar design which allows for 360^o continuous welding without removing of clamp.
• Precision built for accurate alignment and long field life.
• Available with stainless steel contact points for DSS Pipes upon request

SPM Pipe Welding Self Pneumatic Clamp is extremely robust and built to special high standards to withstand pipeline spread operations. Clamps are adjustable for any wall thickness or size within the specified range-independently operated pneumatic jaws allow the line-up of pipes with different wall thicknesses. When correctly used pipe welding pneumatic clamp will not damage or "bell end" the pipe.

Features: 

• An Internal Line up Clamp Pneumatic (Self) covers a range of diameters and is adjustable for wall thicknesses within the specified range.
• According to pipe wall thickness, the Internal Line up Clamp Pneumatic (Self) is adjusted to the required setting by SPM.
• The Internal Line up Clamp Pneumatic (Self) works inside the pipe. Roller-type actuating jaws hold the pipe ends to assure an adequate alignment of two pipe joints for external welding.
• Internal Line up Clamp Pneumatic (Self) are specially developed and built to withstand pipeline spread operations.
• The Internal Line up Clamp Pneumatic (Self) requires compressed air pressure from a compressor.
• Alloy steel wheels provided with clamps for smooth travelling.
• It is ideal choice for construction of oil and natural gas pipeline.
• Independently operated Pneumatic jaws allow the line-up of pipes with different wall thickness.
• Adequate line-up at the next joint is assured by a reserve air tank.
• Conversion kits for various pipe sizes are available upon request.

• Simple, quick and easy to use.
• For pipes from 3” to 48”.
• Will not back off while weld is being made.
• Mechanism is enclosed to eliminate dirt or mud.
• Clamps available in Heavy Duty for higher wall thickness upon request.
• Available with stainless steel contact points for DSS Pipes.
• All Manual No tack Cage clamp have an arched bar design which allows for 360o continuous welding without removing of clamp.
• Hinged to open wide for easy mounting, use, or removal
• Cage type Clamp manual is requires for each diameter of pipe.

Internal Pneumatic Pipe Line-Up Clamp assures a rapid, accurate alignment of two joints of pipe during the welding operation. Front and rear heads operate independently to lock the clamp into position. Specially designed shoes on each head exert pressure uniformly around the inside circumference of the pipe to maintain necessary alignment. Each pipe welding pneumatic clamp is easily and quickly adjusted for different pipe wall thickness.

 

In order to joint pipes on site, these must be centered. In order to weld pipes on site, these must be centered. Pipe Welding Pneumatic Clamps can be used in any terrain.

 

A "Pull type - travelled" Pipe welding pneumatic clamp is pulled to the next joint (manually). 

 

Features:

• Air tank furnish adequate air pressure for lining up incoming pipe joint.
• Conversion kits for various pipe sizes are available on request.
• Pipe Welding Pneumatic Clamp is adjusted to the required setting by SPM according to pipe wall thickness.
• Adequate line up at the next joint is assured by reserve air tank.
• Alloy steel wheels provided with clamps for smooth travelling.
• Pipe Welding Pneumatic Clamps are specially develop and built to withstand pipeline spread operations.

Featuring an ergonomic design, this pipeline welding clamp is made with the operator safety and stability of the pipe in mind. All SPM EQUIPMENT clamps are constructed from solid materials for strength and durability and are built to last and acutely align pipe for years.

Available Pipe Size from 6" and Above

• Production Capacity: Ex Stock
• Delivery Time: Ex Stock
• Packaging Details: Wooden Box for Export and Domestic for loose packing

All Cage Type Pipe Clamp-Manual (Tack Type) is precision fitted to proper specification to ensure Proper alignment and quick clamping. All standard clamps have straight cross bars and is removed from the pipe before final welding. Cage Type Pipe Clamp Manual is simple, quick and easy to use.

SPM offers to contractors a full line of cage type clamps tack type to meet the specific pipe handling needs of each project.

Features:

• Precision built for accurate alignment and long field life.
• Available with stainless steel contact points for DSS Pipes.
• Simple, quick and easy to use.
• Cage type Clamp manual tack type is requires for each diameter of pipe.
• Accurately aligns in minutes.
• Avaialble size from 6" and Above

• Production Capacity: 10 Piece per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden box for Export and loose packing for Domestic

SPM s Cage type Pipe Clamp Manual is precision Bored for Perfect Roundness and Pipe Sizing We supply you Cage type Clamps with various sizes that fits to your needs Our Cage type Clamps are ruggedly built of quality steel to last longer Additional sizes are available upon request All Cage type Clamps are precision fitted to the proper specification to ensure proper alignment and quick clamping with a convenient hand lever for quick line up the pipe Features Very easy to use Manual Operation Will not back off when weld is being made Available in sizes 3 to 64 All Manual No tack Cage clamp have an arched bar design which allows for 360o continuous welding without removing of clamp Precision built for accurate alignment and long field life Available with stainless steel contact points for DSS Pipes upon request

• Production Capacity: Ex-Stock
• Delivery Time: Immediately
• Packaging Details: Wooden Box Packing for Export And Loos Packing For Domestic.

Hydraulic Cage Clamp is available for pipe sizes 16 to 88 The clamp pulls down tight with a hydraulic jack for effortless pipe alignment The hydraulic closure mechanism on this cage clamp also enables rapid release after welding FEATURES Tighten with hydraulic Jack with heavy duty hydraulic hand pump Easy to alignment and very easy to use Available size 16 to 88 All hydraulic Cage type Clamp are precision fitted to the proper specifications to ensure proper alignment and quick clamping with a convenient hydraulic jack for quick line up of the pipes All hydraulic standard Cage Clamps have a flat cross bar design for more strength All hydraulic no tack Clamps have an arched cross bar design which allows 360 degree continuous welding without clamp removal

• Production Capacity: More Thane 10 Nos per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box Packing For Export And Loos Packing For Domestic