DSS Pipe Welding Equipment

Being a quality focused name, we offer the best quality of Pneumatic Clamp Purging System.

Features:

• Front and rear heads operate independently to lock the clamp into position.
• Adjustable for different wall thickness.
• Sturdy construction.
• Longer functional life.

• Production Capacity: 10 PIECE
• Delivery Time: 1 WEEK
• Packaging Details: WOODEN BOX FOR EXPORT AND LOOSE FOR DOMESTIC

The SPM EQUIPMENT S pneumatic clamps with Purging assure a rapid accurate alignment of two joints of pipe during the welding operation Front and rear heads operate independently to lock the clamp into position Specially designed shoes on each head exert pressure uniformly around the inside circumference of the pipe to maintain necessary alignment along with necessary Purging Arrangement suitable for DSS Pipe Joint Models available o Non self Travelling units for pipe sizes 6 to 20 o Self Travelling units for pipe sizes 16 to 64 A Self Travelled pipe welding pneumatic clamp travels through the pipe to the next joint under its own power A non self Travelled Pipe welding pneumatic clamp is pulled to the next joint manually Pipe welding pneumatic clamp require compressed air at 100 145 psi 7 10 bars Maximum safe working pressure is 175 psi 12 bars Features Clamps 12 64 will cover two pipe sizes by use of conversion kits Emergency braking systems available upon request Adjustable for various wall thicknesses with silicon purging tube Air tank provides sufficient air pressure for lining up incoming pipe joint Equal expansion amp closure of shoes prevents the deformation of pipes and get more tightness with accurate roundness Automatic centering helps to prevent Hi low Conversion kits for various pipe sizes are available upon request All touching points provided suitably for DSS Pipes to prevent corrosion Not required to change the Purge Dams in various Wall thicknesses in the range No requirement for extra Air line for silicon Purge Silicon tube made out of Silicon Rubber to avoid damage while temperature of welding Sufficient space for Purge Gas will be available in the Clamp The Oxygen integral exhaust out line is provided in the system for easily analyzing Available with SS Reach Rod Easy to use and storage

• Production Capacity: 5 set Per Week
• Delivery Time: 10 day.
• Packaging Details: Wooden For Export And Loos For Domestic.

The SPM EQUIPMENT Offer a wide range of Pneumatic Clamp with Purging Arrangement All of our pipe alignment clamps have been rigorously tested in the field Pipe clamps are available for Carbon steel and stainless steel pipe welding applications Features Available for pipe sizes from 6 to 20 Non Self and 20 to 64 Self Propelled Easy to install operate and use Toggle action puts maximum power on pipe Each clamp machined for specific wall thickness Heavy duty all steel construction Pipeline proven Economical option for alignment of pipe This clamp will be operated by hydraulic manual hand pump and the same shall be supplied along with internal Clamp either you can use it by motorize hydraulic power pack All touching points provided suitably for DSS Pipes to prevent corrosion Not required to change the Purge Dams in various Wall thicknesses in the range Purge Dam made out of Silicon Rubber to avoid damage while temperature of welding Sufficient space for Purge Gas will be available in the Clamp The Oxygen integral exhaust out line is provided in the system for easily analyzing Available with SS Reach Rod Hydraulic Hose Purging Gas Pipe and Air Pipe

• Production Capacity: 5 Set Per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box Packing For Export And Loos Packing for Domestic

The SPM EQUIPMENT S pipe welding pneumatic clamp copper back up assures a rapid accurate alignment of two joints of pipe during the welding operation Front and rear heads operate independently to lock the clamp into position Specially designed shoes on each head exert pressure uniformly around the inside circumference of the pipe to maintain necessary alignment Each line up Clamp is easily and quickly adjusted for different pipe wall thickness Features Copper Back up ring assemblies are installed Pneumatic Internal Line up Clamps Ring Assemblies provide totally separate front and rear clamping mechanisms of the Pneumatic Internal Line up Clamps Copper back up clamp design ensures each copper shoe will fully contact the internal surface of the pipe The designing decreases the time for fit up and eliminate errors such as lowering of the copper shoes during the welding cycle The shoes can also be resurfaced three times giving you more efficient and cost effective operation All other accessories related the semi automatic amp automatic welding machine like a Belt Copper Back up Strip Nozzle and all mechanical repairing of Semi automatic amp automatic welding machines Available sizes from 16 to 48 pipes

• Production Capacity: 5 set per week
• Delivery Time: 1 week .
• Packaging Details: loos packing for domestic and wooden packing for export.

Banking of years of experience we are offering a wide range of Pneumatic Clamp with Purging Arrangement (Internal). The SPM EUIPMENT’s pneumatic clamps with purging arrangement assured accurate alignment of two joints of pipe during the welding operation. All of our pneumatic internal clamps with purging arrangements have been extremely tested in the field. Our offered pneumatic clamp with purging arrangement used to pipe welding application for carbon steel and stainless steel pipe.

We are specially designed shoes on each head that utilize pressure uniformly around the inside circumference of the pipe to maintain necessary alignment along with necessary purging arrangement suitable for the DSS pipe joint.

Manual Travelling units for pipe sizes 6″ to 20”

A “Manual Travelled “Pneumatic Clamp with Purging Arrangement (Internal) is pulled to the next joint manually. Pipe welding pneumatic clamp requires compressed air at 100-145 psi (7-10 bars). The maximum safe working pressure is 175 psi (12 bars).

• Production Capacity: 10 PIECE
• Delivery Time: 1 WEEK
• Packaging Details: WOODEN BOX FOR EXPORT AND LOOSE FOR DOMESTIC

External Pipe Joint Clamp For Argon Welding is precision fitted to proper specification to ensure Proper alignment and quick clamping. All specially designed clamps have a flat cross bar design with a convenient lever for quick line-up of the pipe.

 

We are making External Pipe Joint Clamp For Argon Welding which is very easy to use and manual operation. 

 

Features:

• Precision built for accurate alignment and long field life.
• Touching points are in Stainless Steel to prevent corrosion.
• Simple, quick and easy to use.
• Accurately aligns in minutes.
• Hinged to open wide for easy mounting, use, or removal.
• Circle secured by single master pin.
• Heavy duty all steel construction.

• Production Capacity: 5 Piece per week
• Delivery Time: 1 Week
• Packaging Details: Loose packing for domestic and wooden packing for export

We have marked a distinct position in the domain by manufacturing and supplying Internal Line up Clamp with Gas Purge System. This internal line up clamp comes with gas purge system. It is used for aligning of total nickel-based pipes, clad pipe & stainless steel pipe prior to welding. Normally used for CRA pipe for offshore pipeline project, this clamp is highly demanded in the market.

 

This Internal Pipe Clamp with Gas Purge System is for total nickel-based pipe. It can align pipes quickly, forming an inert gas protection inside. It is equipped with an oxygen content measurement device, which can monitor the oxygen real time to ensure the welding quality. Power source of the internal clamp is compressed air. The protective gas inflation is direct, allowing back gas protection. Inflation can reduce oxygen content under 100 PPM within 2-5 minutes. The protection gas vent includes wind & sand proof device. 

 

Features:

• Equipped with oxygen meter.
• Easy to install and use.
• Longer working life.
• Quick line up for continuous welding of pipe.
• One specific wall thickness.
• Minimum weight, maximum durability.

The DSS Purge Preventing Systems in the range manufactured by SPM Equipment are designed around the principle of using 2 silicon purging tubes to create a seal either side of the weld, just far enough away from the weld not to be effected by heat but close enough to the joint to provide the fastest weld purge time. Once ready to start purging, the system is inserted into the bore of the pipe using reach rod to centre the system to the weld gap.

When the gas flow is started, the silicon purging tube inflate and upon reaching the pre-set pressure, the valve releases the gas gently into the weld chamber to purge the inter space without turbulence. The Oxygen is removed from the weld chamber through the integral exhaust out line which provided in the system. Used in conjunction with  Oxygen Monitors to indicate when the required low level of oxygen has been reached, welding can then commence, with the inert gas enabling the welder to produce an even oxidation free penetration weld bead. Afterwards, the silicon purging tubes are deflated simply by operating the valve in the panel box and taken back the preventing system easily.

Features:

• Easy to install use & storage.
• Travelling wheel provided for easy to push-pull.
• Available with Reach Rod, Purge Gas Pipe & Air Pipe.
• Less maintenance.
• DSS Pipe Clamp with Purging Arrangement Hydraulic are requires for each diameter of pipe separately.
• Accurately align in minutes.
• Toggle action puts maximum power on pipe.
• Each clamp machined for specific wall thickness.

Our superior quality INTERNAL CLAMP WITH PURGING SYSTEM These Clamps are manufactured using high grade steel and iron These clamps have unique features of rust resistance durability sturdy construction and accurate dimensions Designed to meet the customized specifications provided by the clients SPM EQUIPMENT brings you high quality and reliability unparalleled INTERNAL CLAMP WITH PURGING SYSTEM Each clamp machined for specific wall thickness and pipe O D Our internal clamp with purging system is specialized for offshore work SPM EQUIPMENT designed internal clamp with purging system for efficient operations and silicon purging tube for presence of purge gas when welding is occur We have various models of Pipe joint Clamps to choose from Feature Quick Line up for continuous welding of pipe Toggle action puts maximum power on pipe It is designed for all diameter and wall thickness of pipe Pipe Joint Internal Clamps are available in 16 to 60

• Production Capacity: 5 Set Per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box Packing For Export And Loos Packing for Domestic

We have marked a distinct position in the domain by manufacturing and supplying Internal Line up Clamp with Gas Purge System This internal line up clamp comes with gas purge system It is used for aligning of total nickel based pipes clad pipe amp stainless steel pipe prior to welding Normally used for CRA pipe for offshore pipeline project this clamp is highly demanded in the market This Internal Pipe Clamp with Gas Purge System is for total nickel based pipe It can align pipes quickly forming an inert gas protection inside It is equipped with an oxygen content measurement device which can monitor the oxygen real time to ensure the welding quality Power source of the internal clamp is compressed air Technical points and advantages of DP clamp Air flow of inflation system can reach 30 L min Equipped with oxygen meter the accuracy can be up to 10 PPM The protective gas inflation is direct allowing back gas protection Inflation can reduce oxygen content under 100 PPM within 2 5 minutes The protection gas vent includes wind amp sand proof device Features Equipped with oxygen meter Easy to install and use Longer working life Pipe sizes 16 to 60 and upper range will be available on request Quick line up for continuous welding of pipe One specific wall thickness Minimum weight maximum durability

• Production Capacity: 5 Set Per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box Packing For Export And Loos Packing For Domestic

Driven by technical excellence we are counted as the topmost manufacturer and supplier of excellent quality of DSS PIPE CLAMP WITH PURGING ARRANGEMENT that is widely used in Oil amp Gas pipeline project Under the vigilance of dexterous professionals the provided clamp is perfectly manufactured using premium class components and modern engineering concepts in line with set industry standards Furthermore the offered clamp is duly examined against numerous measures of quality by our quality inspectors to ensure its durability The DSS CLAMP WITH PURGING ARRANGEMENT HYDRAULIC employs hydraulic jack for opening and closing the clamp and silicon purging tube for present of purge gas when welding is accrue This feature is especially valuable when aligning 14 to 64 diameter pipe It is mostly applicable for 14 to 64 pipe jointing operation Features Easy to use Available pipe size 16 to 64 and upper size available on request Heavy duty all steel construction DSS PIPE CLAMP WITH PURGING ARRANGEMENT HYDRAULIC are requires for each diameter of pipe separately High efficiency no needs to do adjustment Pipeline proven Power unit required only motorize version

• Production Capacity: 5 Set Per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box Packing For Export And Loos Packing For Domestic

SPM EQUIPMENT is a topmost manufacturer of DSS pipe clamp with purging arrangement hydraulic (Internal). We are offering different sizes of clamps for your valuable pipeline projects starting with 14” diameter.

The Purge Preventing Systems in the range manufactured by SPM EQUIPMENT are designed around the principle of using 2 silicon purging tubes to create a seal on either side of the weld, just far enough away from the weld not to be affected by heat but close enough to the joint to provide the fastest weld purge time. Once ready to start purging, the system is inserted into the bore of the pipe using a reach rod to center the system to the weld gap.

When the gas flow is started, the silicon purging tube inflates and upon reaching the pre-set pressure, the valve releases the gas gently into the weld chamber to purge the interspace without turbulence. The Oxygen is removed from the weld chamber through the integral exhaust outline provided in the system. Used in conjunction with Oxygen Monitors to indicate when the required low level of oxygen has been reached, welding can then commence, with the inert gas enabling the welder to produce an even oxidation-free penetration weld bead. Afterward, the silicon purging tubes are deflated simply by operating the valve in the panel box and taken back the preventing system easily.

Our offered each clamp is machined for a specific pipe internal diameter and comes with a standard 12-meter reach rod, hook, and handle.

Further, we are making standard size DSS clamp with Purging Arrangement Hydraulic (Internal)

12” and Above and  upper size will be available on request as per the client’s specification and requirement.

• Production Capacity: 5 PAR WEEK
• Delivery Time: 1 WEEK
• Packaging Details: Wooden Packing for export and Loose for domestic

SPM EQUIPMENT is a leading manufacturer and supplier of Internal Clamp with Purging System. This clamp is manufacturing with the use of top-quality steel and iron and each clamp is machined for specific wall thickness and pipe outer diameter. We are designed an internal clamp with a purging system for efficient operation. Silicon purging tube for the presence of purge gas when welding is occurring. This internal pipe clamp with a gas purging system is for a total nickel-based pipe. The clamp can align pipes quickly, forming inert gas protection inside. It is equipped with an oxygen content measurement device, which can monitor the oxygen in real-time to ensure the welding quality. The power source of the internal clamp is compressed air.

These clamps have unique features of rust resistance, durability, sturdy construction, and accurate dimension. Design to meet the customized specification provided by the client.

Technical points of Internal Clamp with purging system are airflow of inflation system can reach 30 L/min. equipped with an oxygen meter; the accuracy can be up to 10 PPM, the protective gas inflation is direct, allowing back gas protection.

• Production Capacity: 5 per week
• Delivery Time: 1 week
• Packaging Details: WOODEN BOX FOR EXPORT AND LOOSE FOR DOMESTIC