Line pipe Equipment

Our cage type pipe clamp hydraulic is easy for alignment and very easy to use All Clamps are precision fitted to the proper specification to ensure proper alignment and quick clamping with convenient hydraulic hand pump and jack for quick line up for the pipe The Hydraulic Cage Clamp is available for pipe sizes 18 to 88 The clamp pulls down tight with a hydraulic jack for effortless pipe alignment The hydraulic closure mechanism on this cage clamp also enables rapid release after welding Features Accurately aligns in minutes Hinged to open wide for easy mounting use or removal Circle secured by single master pin Available in sizes from 18 to 88 Heavy duty all steel construction Tighten with hydraulic jack to get more strength Easy for alignment and very easy to use Available in standard and no tack arched bar model All hydraulic cage type pipe clamps have a flat cross bar design for more strength Cage type Clamp Hydraulic is requires for each diameter of pipe separately Hydraulic system operated with high pressure hand pump no electricity fuel required Available with stainless steel contact points for DSS Pipes upon request

• Production Capacity: 10 Set Per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box Packing For Export And Loos Packing For Domestic.

SPM Internal Line up Clamp Pneumatic are extremely robust and built to special high standards to withstand pipeline spread operations Clamps are adjustable for any wall thickness or size within the specified range independently operated pneumatic heads allow the line up of pipes with different wall thicknesses When correctly used Internal Line up Clamp Pneumatic will not damage or bell end the pipe A Pull type travelled Internal Line up Clamp Pneumatic is pulled to the next joint manually Internal Line up Clamp Pneumatic requires compressed air at 100 145 psi 7 10 bars Maximum safe working pressure is 175 psi 12 bars Pull type Travelled units for pipe sizes 6 to 20 FEATURES Internal Line up Clamp Pneumatic covers a range of diameters and is adjustable for wall thicknesses within the specified range According to pipe wall thickness the Internal Line up Clamp Pneumatic is adjusted to the required setting by SPM Internal Line up Clamp Pneumatic are specially developed and built to withstand pipeline spread operations The Internal Line up Clamp Pneumatic requires compressed air pressure from a compressor Alloy steel wheels provided with clamps for smooth travelling It is ideal choice for construction of oil and natural gas pipeline Independently operated Pneumatic heads allow the line up of pipes with different wall thickness Adequate line up at the next joint is assured by a reserve air tank Conversion kits for various pipe sizes are available upon request

• Production Capacity: 3 Nos Per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box Packing for Export And Loos Packing For Domestic

The SPM EQUIPMENT’S pipe joint internal clamps are custom-built, offering a range of solutions for accurate internal alignment. These internal clamps are manufactured for precision and are field-proven to be tough and durable. Pipe Line up Clamp available 6” and 8”. Our offered Pipe Line up Clamp is a great solution for the small-size pipeline. Pipe Line up Clamp comes with optional copper or stainless steel and comes standard with carbon steel.

• Production Capacity: 5 PIECE PER WEEK
• Delivery Time: 1 WEEK
• Packaging Details: Wooden Box for export and loose packing for domestic

The SPM EQUIPMENTS Pipe welding pneumatic clamps assures a rapid accurate alignment of two joints of pipe during the welding operation Front and rear heads operate independently to lock the clamp into position Specially designed shoes on each head exert pressure uniformly around the inside circumference of the pipe to maintain necessary alignment Each pipe welding pneumatic clamp is easily and quickly adjusted for different pipe wall thickness Our Pipe Welding Pneumatic Clamp work inside the pipe to align two pipe joints for external welding Motorized Pneumatic Clamp Self Travelled units is available for pipe sizes 16 to 64 A Motorized Pneumatic Clamp travels through the pipe to the next joint under its own power Pipe welding pneumatic clamp require compressed air at 100 145 psi 7 10 bars Maximum safe working pressure is 175 psi 12 bars FEATURES Standard sizes 16 64 and 64 120 available upon request PWPC assures a quick accurate alignment of two joints of pipe during the welding operation Front and rear clamping Jaw operate independently to lock the clamp into position realize accurate alignment of pipe joints quickly and accurately Clamps 16 64 will cover two pipe sizes by use of conversion kits Adjustable for various wall thicknesses Air tank provides sufficient air pressure for lining up incoming pipe joint Equal expansion amp closure of jaws prevents the deformation of pipes and get more tightness with accurate roundness Automatic centering helps to prevent Hi low PWPC s are specially developed and built to withstand pipeline spread operations Adequate line up at the next joint is assured by a reserve air tank Options include devices and wheels to suit internal coatings Conversion kits for various pipe sizes are available upon request

• Production Capacity: 3 Nos Per Week
• Delivery Time: 1 Week
• Packaging Details: Wooden Box Packing for Export And Loos Packing For Domestic

SPM s Cage type Pipe Clamp Manual is precision Bored for Perfect Roundness and Pipe Sizing We supply you Cage type Clamps with various sizes that fits to your needs Our Cage type Clamps are ruggedly built of quality steel to last longer Additional sizes are available upon request All Cage type Clamps are precision fitted to the proper specification to ensure proper alignment and quick clamping with a convenient hand lever for quick line up the pipe Features Very easy to use Manual Operation Will not back off when weld is being made Available in sizes 3 to 64 All Manual No tack Cage clamp have an arched bar design which allows for 360o continuous welding without removing of clamp Precision built for accurate alignment and long field life Available with stainless steel contact points for DSS Pipes upon request

• Production Capacity: Ex Stock
• Delivery Time: Immediate
• Packaging Details: Wooden Box Packing For Export And Loos Packing For Domestic

SPM EQUIPMENT has produced internal hydraulic clamps for pipe welding Build on the prediction that hydraulic was the future state of the art in pipe welding SPM has created a unique range of clamps in close co operation with customers around the Globe The SPM Pipe Alignment Clamp Hydraulic is having the following FEATURES Available for pipe sizes from 16" adn above Each clamp machined for specific wall thickness Power unit required only motorize version Available with copper back up Easy to install and operate Each Clamp requires for each diameter of pipe

• Production Capacity: 5 set per week.
• Delivery Time: 1 week
• Packaging Details: loos packing for domestic and wooden box packing for export.

The SPM EQUIPMEN S superior quality pipe joint clamps are manufactured using high grade iron and steel These clamps have unique features of rust resistance durability sturdy construction and accurate dimensions Designed to meet the customized specifications provided by the clients our range operates on screw jack type mechanism in order to have adequate alignment FEATURES Pipe sizes 10 to 48 Quick line up for continuous welding of pipe Complete with hook and handle Full round stringer beads eliminate costly tacking and weld defects Minimum weight maximum durability Screw jack type mechanism to have adequate alignment Toggle action puts maximum power on pipe Heavy duty Gear box puts more power on the pipe with less operator effort Copper back up for automatic welding also available upon request Also available with Purging Set up for DSS pipe upon request

• Production Capacity: 10 nos per week.
• Delivery Time: 1 week.
• Packaging Details: loos packing for domestic and wooden box packing for export.